AAVIX AGT314 4 gallon 10 Amp Multifunction Ash Vacuum Cleaner, Black
AGT314 is a multipurpose vacuum cleaner, professionally designed to clean cold ash out of fire pits, pellet and wood stoves, barbecue grills and can as well work as a blower to clean your dusty floor, carpet, etc. It eventually offers the best return on investment. It come with Black Metal Flexible Pipe: 1 set Aluminum nozzle: 1 Cartridge filter: 1 Filter bag: 1 Tubes: 3pcs Assorted brush: 1 Floor brush:1 Carrying strap It has relatively longer flexible power cord. 59 inch compared to other models in the market. The cost is tremendously reduced since you won’t incur the expenses of buying power extension and frees you from the restriction of having to work just next to a power socket due to limitation of the short power cord. Portability is a core factor to consider when buying any appliance or machinery. This vacuum cleaner is very light in weight at around 9.5 pounds; you will never found one like this before! It is entirely made of aluminum metal with provision of wheels at its base and has a strong carry strap handle at the top, making it easy to lift and move around as you enjoy your normal cleaning chores. The provision of dust-full indicator, dust filter bag and assorted floor brushes for scrubbing sticky dust and ash makes it exemplary and not just an ordinary vacuum cleaner. This is a perfect appliance for those who are looking for less noisy and more powerful gadget. The noise level is rated at most 77dB with operational power of 10 Amp and motor rating at 120V, 60Hz. To sum it all, this vacuum cleaner is the solution to all ash cleaning issues; it’s just a amazing and flawless.
How to clean leaf blower carburetor
Working the carburetor on a leaf blower is to combine gas and air to make a fuel mixture and control the engine speed.
Check your blade blower for a dirty carburetor if you notice the leaf blower does not start or lack of power.
Cleaning your carburetor from the leaf blower is not difficult but requires dismantling part of the engine. Pay close attention to how each part sits on the leaf blower while you are taking it apart. This will make it easier to put them all together.
- Place the blower on a flat surface. Open the air filter cover by pressing the button near the handle. Remove the air filter. You will now see the carburetor cover.
- Use an Allen wrench to remove the carburetor cap screws. Take the leaf blower cover. The carburetor is now exposed.
- Loosen the gas cap so there will be no pressure in the gas pipes towards the carburetor. Remove the gas lines from the carburetor and carburetor in a cloth, with the red bulb facing up.
- Remove the two screws from the top of the carburetor. Set aside the top. Carburetor cover upside down and remove the two screws securing the bottom. Set aside the bottom. Take the diaphragm from the bottom of the carburetor. The diaphragm must be flexible. If it is not, replace it with a new one.
- Insert the supplied straw tip into a carburetor cleaner can. Place the straw tip into each carburetor hole and some inside spray cleaner. Clean the carburetor with a clean cloth. Clean some of the entire exteriors of the carburetor and clean it with a rag. Set aside the carburetor to dry.
- Clean the top and bottom of the carburetor with the vacuum cleaner and clean. Repeat this process with the diaphragm as well. Fix these pieces aside to dry in the air.
- Place the carburetor cap back into the carburetor and secure with screws. Place the flat membrane on the bottom of the carburetor. Place the back of the carburetor over the diaphragm and secure with screws.
- Fit the gas lines back into the carburetor and push the carburetor into the blade blower. Place the cover removed in step 2 above the carburetor and use an Allen wrench to tighten the bolts.
- Insert the new air filter into the blade blower. Replace the air filter cover on the side of the leaf blower and push it in until it snaps into place.